Using MobiFlight with Prosim737

Using MobiFlight with Prosim737 - A Boeing 737-800 Homecockpit #35

Hello guys, finally a new technical episode and a new concept behind all this electronic stuff.

I decided to use MobiFlight for a while instead of writing a connection software for the arduino myself. You can find out everything about the reasons in the video. I have to say that the connection with MobiFlight is very stable and easy to configure. You have to keep in mind that the software doesn't synchronize the positions of your hardware switches with the switches in the simulator so you have to check these yourself before you start MobiFlight.

Now I have to get some more Arduino Megas to keep them installed in my simulator.

This entry was posted in MobiFlight, Programming, Prosim737. Bookmark the permalink.

8 Responses to Using MobiFlight with Prosim737

  1. Hey Mickey
    First of all, great respect for what you are doing here! really great !!! Now to my problem, which other users may also have – I want to connect a CP-Flight landing gear lever with two switches to the ProSim737 “V1.52” via Mobiflight Mega 2560 and don’t know how to do it. The LEDs for the annuciators run via Phidgets cards to the MIP (should stay that way). So far I had connected the lever to ProSim via Pokeys cards (LAN) and now wanted to convert it for optimization reasons
    Can you help ? (SORRY my english …)

    • Mickey says:

      You are talking about many components I’m not familiar with. So I can only give you the advice to have a look to my Prosim and MobiFlight video if you want to use the Mega. I think this should work for you. And you have to enable the FSUIPC drive in Prosim so that the devices can communicate via this way.

  2. Herly Yanto says:

    Hallo Mickey,

    I have questions, how to set announciator? And is there RTO or autobrake setting in latest ProSim?

  3. Emmanuel váltin Jesus says:

    Maybe it fault of a driver or somewhat like this… I’ve seen many videos on youtube and i didn’t find nothing. So then i found your blog. Sorry about how i wrote but i don’t know more what can i do. It’s on you… Thank you until now.
    And sorry my English. Hope you understand.

  4. Emmanuel váltin Jesus says:

    Helo good morning, i want to conect an 737 CDU arduino to prosim, so how can i do this?
    Can you send me a video explain the connections, i would be happy for this… Because i have an engravity prosim Cdu and it doesn’t work… It starting and then going to standby power a few seconds later.
    Please please please???? help me.

    • Mickey says:

      Sorry, I haven’t done anything concerning the CDU until now. And especially this problem doesen’t sound like a general Prosim problem. First of all you should try to find something about this in your manual of the CDU. As a next step I would try to search in the prosim forum or start a new topic. If you can’t find help I would try to contact your support at engravity.

  5. Andreas Thielmann says:

    Hallo Michael,

    habe gerade Dein Video über Mobiflight angesehen. Sehr aufschlussreich, ich liebäugele nämlich auch mit einer Arduino-Karte…

    Als Fan von allen Deinen Videos, die wirklich einzigartig sind, hier nur ein kleiner Verbesserungsvorschlag: Dein Englisch ist exzellent, doch gibt es im Englischen für „Informationen“ keinen Plural. Es heißt also für Sg. und Pl. immer „information“ (ohne ‚s‘ am Ende).

    Bitte nicht als Kritik verstehen, sondern nur als Anregung für zukünftige Videos.

    Herzliche Grüße und schöne Weihnachtsfeiertage,

    Andreas
    aka ‚andthiel‘ im ProSim-Forum

Leave a Reply to Emmanuel váltin Jesus Cancel reply

Your email address will not be published. Required fields are marked *